Assembly Instructions
for
Custom Heat Kit Systems
Hot
Water Coil Details
Domestic
Hot Water Coil Locations
updated July 20/05
Hot
Water Coil Installation Instructions
Domestic
Hot Water Coil Schematics
Extra
Height Heater with Hydronic Coils
(experimental only)
Drawings for Davenport
Heater
download (150 Kb Word file)
Firebox widened
to 32", no oven
(firebox door supplied by client)
view of CAD model
download (1.3 Mb PDF)
Firebox widened to 32", corner
heater, no oven
(firebox door supplied by client)
view
of CAD model
download (900 Kb Word document)
Custom heater with extra width,
see through, rear oven
isometric
heater
core isometric
download (1.6 Mb)
Custom top chimney exit, no bakeoven
Lower level masonry heater, using existing flue
in upper level fireplace
front
section
isometric
plan
download (400 Kb)
Photo Assembly
Details for Stacked Heaters
Photo
Assembly Details for Heater with Centre Chimneys
(Figure 11 in Heat Kit
Planning Guide)
Basement firebox only with upstairs
heat battery
600 Kb PDF file
Firebrick (hand built) side channels,
New air system (prototype)
download (300 Kb Word
document)
(Nov 26/03)
Custom fireplace/bakeoven
Background information
download (122 Kb)
Custom curved
facing and heated bench
client's floor plan, elevation,
preliminary footprint
heated bench section
master layout drawing for custom
curved bench and facing
firebox door detail, bakeoven
door detail
Cookstove with right exit
Plans
Small cookstove plan from Finland
(hardware available from Maine Wood Heat)
Instant cantilevered slab done
with angle iron and 4" blocks instead of reinforced concrete
Photo
1, Photo
2
|